Can't connect to bubba2

[diavol]

Hi
I have use my bubba for around 2 years now and had never had that problem before.

The problem is that I yesterday mowed bubba to another room in apartment (turned it off with button exactly how I should). Then I connected bubba back in I hope router... mode but i hade some siriosly problem to connect to bubba but i worked for some time.
Now i can't connect to bubba by wifi, LAN port, WAN port or in some other way. I tried on ubuntu, win7 and winXP. Some ideas?

[johannes]

sounds like network issues. You have another router on your network? and you connected Bubba 2 LAN to your router? Try restarting your bubba 2...

[diavol]

Thanks for answer!
Unfortunately a haven some another router for the moment, it is why i have tried to use bubba like it. i have restarted it several times, it did't help. will see if I can find some router to test. Does bubba have something like COM-port?

[johannes]

Could be your B2 setup as server only perhaps? THen it won't work as router.

[diavol]

Well, now i found a old AP with DHCP and successfully connected to bubba trow it. bubba i configured like a router+firewall+serer, and all settings seems to be ok, but i still cant directly connect to bubba, nether cable or wifi.

[johannes]

so you get an IP from Bubba2, and you can surf through it, but cannot connect directly to it? What happens if you enter it's IP in a browser?

[diavol]

No, I do not get a IP-from bubba2, I get a IP by router. I can surf to bubba2's-IP and change settings and so, but I never get a direct connection to bubba2. Is it some log-files that I should post here?

[johannes]

Sorry but I really don't get this:

I can surf to bubba2's-IP and change settings and so, but I never get a direct connection to bubba2.

If you can surf to bubba 2 and change settings, you do get a direct connection, or?

[diavol]

I get connection through router like PC->router->bubba but not PC->bubba direct connection.

[johannes]

But in order to connect to bubba directly you need to disconnect bubba from your network (since the PC <-> bubba direct connection is through the LAN port), right? And you also need to have bubba in either "automatic network settings" or "router/firewall" mode in order to make it give your PC an IP adress.

Is this how you do it? THen it should work.

[diavol]

yes, of course i disconnect bubba2 from router when i try to connect directly.

bubba is configured like a router+firewall+serer, and all settings seems to be ok.

[johannes]

Then it should work. Try restarting both bubba and your PC to make your PC re-request the IP.

[diavol]

well, the problem is that it does not help.

[johannes]

even after a restart? Than I really cannot help you anymore, this producure should be failsafe. After this the only thing I can think of is sending it in to us for checkup.