Hey everyone,
I recently purchased my bubba two and I've been loving it. However, I've noticed that when transferring files, the speed maxes out at around 6.5 mB/s. This occurs on multiple different gigabit networks and over different protocols, with ssh, smb and ftp all maxing out at these speeds.
Running top at this time shows that the cpu is running at ~48% capacity, so I doubt that that is the limiting factor here.
Is this normal behaviour, or is something amiss here? I am running both the latest firmware(from the web interface), and I have manually upgraded using apt.
- Adross
Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Slow transfers
Re: Slow transfers
http://forum.excito.net/viewtopic.php?f=9&t=1436
Basically its a known issue with ftp etc. SSH is always slow anyway, because of the CPU overheads. Nobody knows why yet. Performance for other traffic is fine though and is pretty close to the theoretical specs of gigabit LAN.
Basically its a known issue with ftp etc. SSH is always slow anyway, because of the CPU overheads. Nobody knows why yet. Performance for other traffic is fine though and is pretty close to the theoretical specs of gigabit LAN.
Re: Slow transfers
The other thread stated that, normally, smb transfers should be about 7 mB/s, tops.
If so, why even bother putting gigabit ethernet on?
If so, why even bother putting gigabit ethernet on?
Re: Slow transfers
This was resolved by moving to the unstable repositories
Re: Slow transfers
HmmAdross wrote:This was resolved by moving to the unstable repositories
and how to do that??
best regards
Ubbe
Re: Slow transfers
Edit /etc/apt/sources.lst and uncomment the unstable sources.
Bear in mind that unstable sources are precisely that and you could damage your install, so only try this if you are comfortable with manually fixing anything that potentially goes wrong.
This thread might give you some guidance as well
http://forum.excito.net/viewtopic.php?t ... sc&start=0
Bear in mind that unstable sources are precisely that and you could damage your install, so only try this if you are comfortable with manually fixing anything that potentially goes wrong.
This thread might give you some guidance as well
http://forum.excito.net/viewtopic.php?t ... sc&start=0
Re: Slow transfers
Thnx m8
I will try to make this out
I will try to make this out
