Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Mounting the B2 on the wall
Mounting the B2 on the wall
Is it from a technical point of view possible to mount a B2 on the wall with the connectors at the bottom?
-
RandomUsername
- Posts: 904
- Joined: 09 Oct 2009, 18:49
Re: Mounting the B2 on the wall
I don't see why not.
I'm not in front of my B2 at the moment and can't remember if it has any cooling vents but presumably if it has any they're only at the back so it should be fine.
Hard drives can by positioned at any angle so there's no problem there either.
Just make sure it's securely mounted
I'm not in front of my B2 at the moment and can't remember if it has any cooling vents but presumably if it has any they're only at the back so it should be fine.
Hard drives can by positioned at any angle so there's no problem there either.
Just make sure it's securely mounted
Re: Mounting the B2 on the wall
Me either, but better safe then sorry....RandomUsername wrote:I don't see why not.
It hasn't, that's why i bould it in the first place...RandomUsername wrote:....and can't remember if it has any cooling vents
Hmm, now you mention it.....RandomUsername wrote:Just make sure it's securely mounted
Re: Mounting the B2 on the wall
Yes, should be no problems mounting it on the wall, as long as you don't put it with connectors upwards. (This since the glue keeping the front sheet plate in place _might_ not cope with the long-term stress of holding the entire bubba interiors weight).
Share a picture when you are done if you can!
Share a picture when you are done if you can!
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)