Hello Raid fans...
My B2 normally boots in a few minutes..
How long should it take before the same config but with RAID is booting.
30 minutes now.. should be too long..and still flashing blue
Rene
Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Boottime B2 with Raid
Boottime B2 with Raid
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
40 users active....
Opensat4all.Com
Re: Boottime B2 with Raid
pfffffffffffff it took 40 minutes...but back online...
rene
rene
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
40 users active....
Opensat4all.Com
Re: Boottime B2 with Raid
oeps what did go wrong..
This is an automatically generated mail message from mdadm
running on Server8
A DegradedArray event had been detected on md device /dev/md0.
Faithfully yours, etc.
P.S. The /proc/mdstat file currently contains the following:
Personalities : [raid0] [raid1]
md0 : active raid1 sda2[0]
965827712 blocks [2/1] [U_]
unused devices: <none>
Anyone got any experience...
Rene
This is an automatically generated mail message from mdadm
running on Server8
A DegradedArray event had been detected on md device /dev/md0.
Faithfully yours, etc.
P.S. The /proc/mdstat file currently contains the following:
Personalities : [raid0] [raid1]
md0 : active raid1 sda2[0]
965827712 blocks [2/1] [U_]
unused devices: <none>
Anyone got any experience...
Rene
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
40 users active....
Opensat4all.Com
Re: Boottime B2 with Raid
ok....he is recovering.... 24hours till ready..
pffffff exciting...writing a RAID blog experience here..
Rene
pffffff exciting...writing a RAID blog experience here..
Rene
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
40 users active....
Opensat4all.Com