Hi. I've been ignoring my B3 server for the pas few months, and found out I had to do some recovery work. I followed instructions (set up a USB partitionned key with FAT32, unzipped everything in install/, plugged the key in the B3, pushed the rear button before and while powering the B3 server, had a green light which after a while turned purple... and has stayed purple for the last 24 hours).
Is there anything more I could do on the software side of things? Or should I resign myself to go fetch a screwdriver?
Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
B3 USB recovery and purple light
Re: B3 USB recovery and purple light
so you tried running our standard installer (no config modifications?) and it still does not boot afterwards? (purple light = booting..)
This usually means that the disk is not well, sorry...
This usually means that the disk is not well, sorry...
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)