Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Bug report - needs confirmation - 40MHz wifi channel

Got problems with your B2 or B3? Share and get helped!
Post Reply
RandomUsername
Posts: 904
Joined: 09 Oct 2009, 18:49

Bug report - needs confirmation - 40MHz wifi channel

Post by RandomUsername »

I'm pretty sure this behaviour is new. Would appreciate it if someone else could confirm this on an up-to-date B3 with wifi.

If you set the B3 to any channel except 5 and set 40MHz channel width, using InSSIDer or similar you will see the signal from the wifi appear at 40MHz width briefly but then step down to only 20MHz width. The only channel I've managed to get it to stay at 40MHz is on channel 5 (InSSIDer registers it as channel 5+9).

Can someone test this?

Thanks.
Top
Post Reply

Return to “B2 & B3 Support”