I running my B3 with RAID via eSata disk. The last day I got error message:
"RAID Array degraded
The array /dev/md0 is degraded"
Anyone know what the problem could be? What I can see the disk seems to be ok.
Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
RAID problem
Re: RAID problem
even a small hiccup in the connection can create this inconsistency. Let it rebuild en keep an eye on it. These things happen. They just should not happen too often 
Re: RAID problem
At the moment this happens once a day and I don't think it's normal?dumbo wrote:I running my B3 with RAID via eSata disk. The last day I got error message:
"RAID Array degraded
The array /dev/md0 is degraded"
Anyone know what the problem could be? What I can see the disk seems to be ok.
Re: RAID problem
I guess it rebuilds to full between those messages? It does sound suspicious. Can you show the data in in /proc/mdstat when the raid is degraded?
Next step will be having a look at the SMART results. Theres a lot of info on that in other threads.
Next step will be having a look at the SMART results. Theres a lot of info on that in other threads.
Re: RAID problem
The data in /proc/mdstat are:nobody wrote:I guess it rebuilds to full between those messages? It does sound suspicious. Can you show the data in in /proc/mdstat when the raid is degraded?
Next step will be having a look at the SMART results. Theres a lot of info on that in other threads.
Personalities : [raid0] [raid1]
md0 : active raid1 sda2[0]
1941979072 blocks [2/1] [U_]
Re: RAID problem
I guess you're right. In my limited knowledge I'd say either the disk is borked or the cable is flaky. If it's still in warranty you may want to submit a message to Excito.