Restore out-of-box iptables settings

[victor]

Hi,

I would like to know if there is a way to reset completely the iptables configuration.

The problem is that I have been using ufw for some times (and put an ugly exit 0 in bubba-firewall init.d script but with the new update it seems there is a lot of needed modules not included in the kernel so I wanted to go back to use the integrated firewall.

I restored the firewall.conf I kept, but it seems to me things are wrong, too much things are open on the WAN port.
So I would like to reset it completly, but I really don't have any idea how to do that and if there is other files than the firewall.conf file to restore…

Thanks!

[Eek]

You can use this one

Code: Select all

# Generated by iptables-save v1.4.8 on Wed Dec 21 20:26:34 2011
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -p tcp -m tcp --tcp-flags SYN,ACK SYN,ACK -m state --state NEW -j REJECT --reject-with tcp-reset 
-A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP 
-A INPUT -i eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A INPUT -i br0 -j ACCEPT 
-A INPUT -i lo -j ACCEPT 
-A INPUT -i eth0 -p icmp -m icmp --icmp-type 11 -j ACCEPT 
-A INPUT -p icmp -m icmp --icmp-type 3/4 -j ACCEPT 
-A FORWARD -i br0 -j ACCEPT 
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A FORWARD -p icmp -m icmp --icmp-type 3/4 -j ACCEPT 
COMMIT
# Completed on Wed Dec 21 20:26:34 2011
# Generated by iptables-save v1.4.8 on Wed Dec 21 20:26:34 2011
*nat
:PREROUTING ACCEPT [2:404]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING -o eth0 -j MASQUERADE 
COMMIT
# Completed on Wed Dec 21 20:26:34 2011

[victor]

Hi thanks,

With a bit of adaptation I managed to use it

That would be really nice to have a better firewall configuration application, this is one seems very sensible to deviations from the normal usage.