Why B2 rebooted?

[janeks]

Why B2 rebooted?
Here is part from syslog:

Code: Select all

Nov 10 23:59:43 bubba mt-daapd[2641]: Starting playlist scan
Nov 10 23:59:43 bubba kernel: option: option_instat_callback: error -71
Nov 10 23:59:47 bubba last message repeated 17 times
Nov 10 23:59:47 bubba mt-daapd[2641]: Updating playlists
Nov 10 23:59:47 bubba kernel: option: option_instat_callback: error -71
Nov 10 23:59:47 bubba last message repeated 2 times
Nov 10 23:59:47 bubba mt-daapd[2641]: Scanned 4439 songs (was 4439) in 57 seconds
Nov 10 23:59:47 bubba kernel: option: option_instat_callback: error -71
Nov 10 23:59:48 bubba last message repeated 5 times
Nov 10 23:59:48 bubba kernel: BUBBATWO: Timeout!
Nov 10 23:59:49 bubba kernel: BUBBATWO: Invoking usermodehelper
Nov 10 23:59:49 bubba kernel: option: option_instat_callback: error -71
Nov 10 23:59:49 bubba shutdown[3561]: shutting down for system reboot
Nov 10 23:59:49 bubba kernel: option: option_instat_callback: error -71
Nov 10 23:59:49 bubba init: Switching to runlevel: 6
Nov 10 23:59:49 bubba kernel: option: option_instat_callback: error -71
Nov 11 00:00:08 bubba last message repeated 98 times
Nov 11 00:00:08 bubba avahi-daemon[2446]: Got SIGTERM, quitting.
Nov 11 00:00:08 bubba avahi-daemon[2446]: Leaving mDNS multicast group on interface eth1.IPv4 with address 192.168.1.110.
Nov 11 00:00:08 bubba kernel: option: option_instat_callback: error -71
Nov 11 00:00:08 bubba kernel: option: option_instat_callback: error -71

brgds & thanks in advance
Janeks

[Ubi]

You wouldn't have anything connected to the USB drive of bubba by any chance?

UBi

[janeks]

Yes I had - USB 3G/UMTS modem. Huawei E1752.

[Ubi]

I thought so. If you take that out the error messages will stop. The problem seems to be typical for this brand of USB modems and are related to an issue in the driver of that modem:
http://www.murga-linux.com/puppy/viewtopic.php?p=357695
The issue seems not to be a problem with Bubba, and only people with that exact brand of modem will be able to help you. Read the above link for help

Ubi

[janeks]

I don't know why but my problem has gone.

It either was connected with the case when I had also another modem (Nokia N30) connected through USB-Serial converter or that I upgraded to last version of usb_modeswitch tool.

Now it works. In my case I am using it just for SMS handling.
But as I have the second unit of buba I will probably try to make from bubba a broadband router.