I have my bubba set up as a server on my network. My router is a Netgear WNDR 3700. The router is set to act as dhcp. The bubba is attached to my network with a cable in the LAN-port. The WAN-port is not used. I have upgrade the bubba to the latest firmware.
However, for some reason my bubba is assigned 192.168.10.1 and I cannot change it. Can anyone help me?
My "normal" ip-range is 192.168.1.1 - 192.168.1.255 which makes the bubba inaccessable as it is for the moment.
I'm not sure exactly when the problem first started.
All help is appreciated!
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Bubba2 stuck on 192.168.10.1
-
teknikguide
- Posts: 2
- Joined: 12 Aug 2010, 12:58
Re: Bubba2 stuck on 192.168.10.1
If you connect to the B2 with SSH and edit the file /etc/network/interfaces with what IP you would like it have (for example 192.168.0.2 i your router have 192.168.0.1) and then restart it, you should get it to work.
SSH guide: http://wiki.excito.org/wiki/index.php/H ... ssh_access
SSH guide: http://wiki.excito.org/wiki/index.php/H ... ssh_access