Page 1 of 4
Bubba uptime contest!
Posted: 08 Feb 2007, 17:35
by lelle
Just for fun, I would like to know who has been running his/her bubba for the longest time without rebooting.
Mine has been running for 19 days, 22:06, I'm sure you'll beat that! Please post your uptime figures
Posted: 08 Feb 2007, 19:24
by Jocke
Uptime 193 days 00:44:18
Posted: 09 Feb 2007, 04:45
by msx
lol, i tought about this too
mine is 4 days, 16 hours (
http://msx.homelinux.org/phpsysinfo ).. but i don't have an UPS so the first time light goes out it will reboot..
wow jocke your uptime is great! but we want proofs
Posted: 09 Feb 2007, 08:38
by Jocke
Hi msx,
I only have a screenshoot right now to prove my uptime, is that good enough?
Posted: 09 Feb 2007, 09:17
by msx
ok, that's enought for me..
Eheh my bubba will catch yours sooner or later
Posted: 18 Feb 2007, 03:27
by John W
*removed*
Posted: 18 Feb 2007, 07:09
by msx
how come it shows you a temperature? is there any sensor on bubba?
mine doesn't:
http://msx.homelinux.org/phpsysinfo/
Posted: 18 Feb 2007, 08:03
by John W
I have installed the package hddtemp and enabled phpsysinfo to read the hdd-temp through it.
Howto:
First download and install the package "hddtemp".
After you have done that modify your phpsysinfo-config.
Remove the two "//".
When you install the program, go with the default settings.
// John
Posted: 19 Feb 2007, 18:23
by msx
do i have to install it as a daemon? anyway i have this output:
bubba:/var/www/html/phpsysinfo# hddtemp /dev/hda
WARNING: Drive /dev/hda doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/hda: ST3500630A: 44 C or F
Posted: 20 Feb 2007, 03:22
by Jocke
I have installed phpsysinfo, so now I have better proof for you msx.
Unfortunately dosen't hddtemp support my hdd
http://www.truuberg.se/phpsysinfo
Posted: 20 Feb 2007, 08:01
by lelle
msx wrote:do i have to install it as a daemon? anyway i have this output:
bubba:/var/www/html/phpsysinfo# hddtemp /dev/hda
WARNING: Drive /dev/hda doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/hda: ST3500630A: 44 C or F
Just add the following line to the /etc/hddtemp.db file:
"ST3500630A" 194 C "Seagate ST3500630A 500.0GB"
2:nd in uptime contest..
Posted: 25 Feb 2007, 09:45
by sgadd
Hi all.
My bubba has:
Uptime 116 days 04:43:59
I guess that puts me on second place..
..Jocke has probably 207 days now.
Posted: 25 Feb 2007, 10:40
by msx
lol, so i'm pushed back to 4° place
i'm currently 21 days.. lelle did you rebooted?
Posted: 26 Feb 2007, 22:39
by lelle
msx, yes, had to reboot my bubba, so at the moment my uptime is only 4 days...
Posted: 18 Mar 2007, 16:52
by Rawhead
My uptime is -5 days
I will get my Bubba on Friday
