Why B3 is so slow?
Posted: 30 Jan 2014, 19:56
Hi! After 2 years I'm using excito NAS again. My old B1 worked for 5 years and i was replaced by Zyxel NSA310. Now i gave a chance to B3 and i am little dissapointed.
On NSA310/320 i can get ~60-70MB/s read and ~40-50MB/s write speed (nastester) (Seagate 160GB/WD Blue 500GB /WD Red 3TB)
On Zyxel with WD Red i can get 144 MB/s read and 84MB/s write speed using dd (10MB blocks, 100 blocks from /dev/zero)
Nastester on B3 using shows 31-32MB/s read speed and 25MB write speed!
and with dd i can get 82 MB/s read speed and 57MB/s write speed
All units has the same cpu Feroceon 88FR131 rev 1 (v5l) but NSA310 has 256MB ram and r8169 network chip
Why bubba is 50% to 100% slower? Can you confirm my results? Does it needs some tweaks?
On NSA310/320 i can get ~60-70MB/s read and ~40-50MB/s write speed (nastester) (Seagate 160GB/WD Blue 500GB /WD Red 3TB)
On Zyxel with WD Red i can get 144 MB/s read and 84MB/s write speed using dd (10MB blocks, 100 blocks from /dev/zero)
Nastester on B3 using shows 31-32MB/s read speed and 25MB write speed!
and with dd i can get 82 MB/s read speed and 57MB/s write speed
All units has the same cpu Feroceon 88FR131 rev 1 (v5l) but NSA310 has 256MB ram and r8169 network chip
Why bubba is 50% to 100% slower? Can you confirm my results? Does it needs some tweaks?