forum.excito.org

Hi
I have use my bubba for around 2 years now and had never had that problem before.

The problem is that I yesterday mowed bubba to another room in apartment (turned it off with button exactly how I should). Then I connected bubba back in I hope router... mode but i hade some siriosly problem to connect to bubba but i worked for some time.
Now i can't connect to bubba by wifi, LAN port, WAN port or in some other way. I tried on ubuntu, win7 and winXP. Some ideas?

sounds like network issues. You have another router on your network? and you connected Bubba 2 LAN to your router? Try restarting your bubba 2...

Thanks for answer!
Unfortunately a haven some another router for the moment, it is why i have tried to use bubba like it. i have restarted it several times, it did't help. will see if I can find some router to test. Does bubba have something like COM-port?

Could be your B2 setup as server only perhaps? THen it won't work as router.

Well, now i found a old AP with DHCP and successfully connected to bubba trow it. bubba i configured like a router+firewall+serer, and all settings seems to be ok, but i still cant directly connect to bubba, nether cable or wifi.

so you get an IP from Bubba2, and you can surf through it, but cannot connect directly to it? What happens if you enter it's IP in a browser?

No, I do not get a IP-from bubba2, I get a IP by router. I can surf to bubba2's-IP and change settings and so, but I never get a direct connection to bubba2. Is it some log-files that I should post here?

Sorry but I really don't get this:

I can surf to bubba2's-IP and change settings and so, but I never get a direct connection to bubba2.

If you can surf to bubba 2 and change settings, you do get a direct connection, or?

I get connection through router like PC->router->bubba but not PC->bubba direct connection.

But in order to connect to bubba directly you need to disconnect bubba from your network (since the PC <-> bubba direct connection is through the LAN port), right? And you also need to have bubba in either "automatic network settings" or "router/firewall" mode in order to make it give your PC an IP adress.

Is this how you do it? THen it should work.

yes, of course i disconnect bubba2 from router when i try to connect directly.

diavol wrote:bubba is configured like a router+firewall+serer, and all settings seems to be ok.

Then it should work. Try restarting both bubba and your PC to make your PC re-request the IP.

well, the problem is that it does not help.

even after a restart? Than I really cannot help you anymore, this producure should be failsafe. After this the only thing I can think of is sending it in to us for checkup.