Page 1 of 3
Printer set up missing
Posted: 25 Jan 2012, 17:31
by cool_tko
Hi everyone
Just got a nice B3 and I am all new here
Yesterday it set the B3 up and activated the printer function. I added my printer but then could not finish due to an error message of which I do not remember what it said.
As I had no success I made a software update of my box. Now I have:
bubba 2.3.2
bubba-album 2.4~pre2
bubba-backend 2.3.2.11
bubba-frontend 2.3.1
bubba3-kernel 2.6.38-1
filetransferdaemon 0.54
squeezecenter 7.6.1.dfsg1-2
But: my printer menu is disappeared. Normally it should be Disk / Printing / Settings... but I miss the Printing in my menu.
In the log i found this:
Jan 25 23:08:10 b3 udev-add-printer: add_queue: URIs=['usb://Canon/MP800R']
Jan 25 23:08:10 b3 udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by any .service files
Jan 25 23:08:10 b3 udev-add-printer: Failed to get D-Bus object for PrinterDriversInstaller: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.PrinterDriversInstaller was not provided by any .service files
Jan 25 23:08:13 b3 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Jan 25 23:08:18 b3 dhclient: No DHCPOFFERS received.
How do I get this back?
Looking forward to your ideas...
Regards,
Thomas
Re: Printer set up missing
Posted: 27 Jan 2012, 13:03
by Nrde
I'm missing printing menu also...
connected USB printer, turned printer on, enabled printing in services -> no printing menu
Code: Select all
Jan 27 18:49:18 b3 udev-configure-printer: add /devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0
Jan 27 18:49:18 b3 udev-configure-printer: parent devpath is /devices/platform/orion-ehci.0/usb1/1-1/1-1.1
Jan 27 18:49:18 b3 udev-configure-printer: Device vendor/product is 04E8:3313
Jan 27 18:49:18 b3 udev-configure-printer: failed to claim interface
Jan 27 18:49:18 b3 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 27 18:49:18 b3 udev-configure-printer: add /devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/usb/lp0
Jan 27 18:49:18 b3 udev-configure-printer: parent devpath is /devices/platform/orion-ehci.0/usb1/1-1/1-1.1
Jan 27 18:49:18 b3 udev-configure-printer: MFG:Samsung MDL:ML-1670 Series SERN:- serial:Z6FZBKAB500565A.
Jan 27 18:49:20 b3 kernel: [ 806.382748] usb 1-1.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
Jan 27 18:49:35 b3 udev-configure-printer: URI matches without serial number: usb://Samsung/ML-1670%20Series
Jan 27 18:49:35 b3 udev-configure-printer: No serial number URI matches so using those without
Jan 27 18:49:35 b3 udev-configure-printer: About to add queue for usb://Samsung/ML-1670%20Series
Jan 27 18:49:35 b3 udev-add-printer: add_queue: URIs=['usb://Samsung/ML-1670%20Series']
Jan 27 18:49:35 b3 udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by any .service files
Jan 27 18:49:35 b3 udev-add-printer: Failed to get D-Bus object for PrinterDriversInstaller: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.PrinterDriversInstaller was not provided by any .service files
Jan 27 18:50:01 b3 /USR/SBIN/CRON[2169]: (root) CMD (/etc/init.d/dovecot status >/dev/null 2>&1 || /etc/init.d/dovecot restart)
Jan 27 18:50:28 b3 udev-add-printer: PPD: foomatic:Samsung-ML-1651N-Postscript.ppd; Status: 1
Re: Printer set up missing
Posted: 27 Jan 2012, 13:08
by RandomUsername
As I recall, the printer functions are now all automated so there should be no need for a menu.
Re: Printer set up missing
Posted: 27 Jan 2012, 13:32
by Nrde
RandomUsername wrote:As I recall, the printer functions are now all automated so there should be no need for a menu.
How do I know to what queue I connect my pc to? Browsing for the printer in windows does not find the printer. Samsung driver installation doesn't find it either.
Re: Printer set up missing
Posted: 27 Jan 2012, 14:09
by RandomUsername
Not sure, I don't use printers with my B3. You'll need to wait for someone to come along who does.
Re: Printer set up missing
Posted: 28 Jan 2012, 09:06
by johannes
Attached printers are now shown in the admin main page. When connected they should be shared by CUPS and SAMBA. If they don't let us know, this is a bug. (And a tip could be to restart samba (or B3)) after plugging in the printer, but let us know if this was an issue so we can fix it).
Thanks!
Re: Printer set up missing
Posted: 28 Jan 2012, 16:30
by Nrde
johannes wrote:(And a tip could be to restart samba (or B3)) after plugging in the printer, but let us know if this was an issue so we can fix it).
I have restarted B3 couple fo times (because of other reasons) but can't see the printer. I just did it to be sure but Attached printers line is still empty.
relevant? lines from syslog after restart:
Code: Select all
Jan 28 22:26:02 b3 udev-configure-printer: URI matches without serial number: usb://Samsung/ML-1670%20Series
Jan 28 22:26:02 b3 udev-configure-printer: No serial number URI matches so using those without
Jan 28 22:26:02 b3 udev-configure-printer: About to add queue for usb://Samsung/ML-1670%20Series
Jan 28 22:26:06 b3 udev-add-printer: add_queue: URIs=['usb://Samsung/ML-1670%20Series']
Jan 28 22:26:06 b3 udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by any .service files
Jan 28 22:26:06 b3 udev-add-printer: Failed to get D-Bus object for PrinterDriversInstaller: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.PrinterDriversInstaller was not provided by any .service files
Jan 28 22:27:01 b3 udev-add-printer: PPD: foomatic:Samsung-ML-1651N-Postscript.ppd; Status: 1
Re: Printer set up missing
Posted: 29 Jan 2012, 04:08
by cool_tko
yes - same problem here
Re: Printer set up missing
Posted: 29 Jan 2012, 16:22
by johannes
Ok, perhaps there are some printers not supported. Can you plase send me your printer models?
Thanks,
/Johannes
Re: Printer set up missing
Posted: 29 Jan 2012, 16:36
by cool_tko
This is One: Canon/MP800R
Re: Printer set up missing
Posted: 30 Jan 2012, 05:56
by Nrde
johannes wrote:Ok, perhaps there are some printers not supported. Can you plase send me your printer models?
Samsung Ml-1670
Re: Printer set up missing
Posted: 30 Jan 2012, 11:28
by johannes
Thanks. We'll try to get one of those printers to check with.
Re: Printer set up missing
Posted: 30 Jan 2012, 19:42
by Nrde
johannes wrote:Thanks. We'll try to get one of those printers to check with.
At least the samsung is cheaper than a toner cartridge
Re: Printer set up missing
Posted: 31 Jan 2012, 03:12
by johannes
Exactly, ordered one yesterday, not a difficult decision.
Re: Printer set up missing
Posted: 03 Feb 2012, 04:27
by Mathew
I also got this printer problem. I have a Samsung ML-1670 laser printer. Thing is, it worked fine with B3s factory installed software version. After update(2.3.2) I got nothing, even after trying the suggested steps above.
Hoping on that fix!
