Page 1 of 1
MTU on bbuba2
Posted: 17 Nov 2010, 09:23
by ramlas
hey
I can“t log on xboxlive - it says that there is something wrong with MTU at Bubba2.
How do I find MTU settings on bubba2??
thank you

Re: MTU on bbuba2
Posted: 17 Nov 2010, 10:12
by Ubi
go to bubba
Code: Select all
su -
apt-get install iputils-tracepath
tracepath ip.of.xb.ox
Re: MTU on bbuba2
Posted: 19 Nov 2010, 14:32
by Cheeseboy
Hi ramlas,
You will not find the MTU settings of your bubba2 in the web interface. You will have to log in with a SSH client and muck about with the command prompt.
Even if the error message mentions MTU, the MTU settings of bubba2 might not be the problem, you might have to analyse the network traffic in detail as Ubi indicated in his reply.
I suggest you submit a new post (or edit the current one) with the following:
- A subject that summarises the actual problem (if you mention xbox, other xbox users on the forum will read it)
- Quote the error message verbatim in your post
- Describe your setup in detail (e.g. your xbox connected to bubba2, which is set up as router for your internal network, with firewall settings so-and-so, etc...)
- Indicate your proficiency with the Linux command prompt (if any)
- Summarize any research (like google the errror message together with "linux") you have done yourself on the error (if any)
This will make it easier and more attractive for other forum members to reply to your post and hopefully help you out.
Cheers,
CheeseBoy
(No XBox)
Re: MTU on bbuba2
Posted: 19 Nov 2010, 16:02
by ramlas
hey
thank you for your answer, I will do so!
venlig hilsen ramlas