Page 1 of 1

Raid 1?

Posted: 06 Aug 2009, 22:31
by Bahurim
First off I did the 1.2 major update and everything is ok so far, thanks guys!!

I am just wondering if the RAID system is working properly and my disk is mirrored.

This is what I did: After the update I logged in as admin, went to Disk-->RAID-->Create RAID array. It asked me to confirm using /dev/sdb1 which is my external drive. After confirming that it went through its machinations and now Disk-->RAID shows

RAID Status
List of RAID arrays
Device Level State Label Size
/dev/md0 raid1 active 222.6G
List of RAID disks
Disk Parent State Size
/dev/sdb1 /dev/md0 in_sync 232.9G
/dev/sda2 /dev/md0 in_sync 222.6G

I take it that everything is as it should be? The /home/storage files are now gone also (I have backups); is that normal?

Re: Raid 1?

Posted: 07 Aug 2009, 03:08
by Bahurim
NVM, I RTFM. Should have known better than to post before reading. Thanks again excito team!