forum.excito.org

Hi all,
i've b2 connect to a router. in lan it works fine, a part some access problem in some clients..., but in wan access happen a strage thing:
if i type Public IP adress from a mobile phone (Windows mobile based) i connect perfectly. If i try to connect from a laptop with an adsl or from a laptop with a umts connection (the same connection of mobile phone...) i'm not able to connect! Wait connection for ever! If i PING from laptop with adsl or gprs the ping works fine.
So i think that is a problem of firewall or browser configuration, as browser i've try with explorer 7, firefox 3 and google chrome but the problem is the same.
Any ideas?
thanks

Can you try this?

http://forum.excito.net/viewtopic.php?t=1141&start=24

/PA

For give an update about situation.

With a Linux (ubuntu) based pc with firefox or a mac (leopard) is possible to access to web interface from wan with the same adsl or the same umts key that won't works in my Windows xp laptop. So at that point is a windows problem because i've try with 3 different windows browser but the thing remain the same. So any suggestions?
Many thanks

Hi,

The reason for asking you to try the above mentioned workaround, is that this "bug" is dependent on how things are aligned in the actual tcp packet.
It is possible that different OS:es align data in the tcp packets differently (a bit too far into the tcp/IP stack for me...)

Did you try the workaround?

/PA

Thanks to a friend of mine, i've resolved the problem!
Was an XP problem! I've fix with a tool called "WinsockxpFix" now i can access to b2 from everywhere office, umts ecc...
BYE