Page 1 of 1
Bubba problem with Tvix 6500, share name?
Posted: 12 Oct 2008, 18:11
by niklinds
Hi
I have bought an Bubba Two and a Tvix 6500 mediaplayer. I can ping the Bubba from the mediaplayer but i can not see the folder, in set up you have to add a namn of the NAS, i have tried everything without result.
Can anybody please help me wich namn i should add in the Tvix 6500 so that i can get access to the bubba.
Posted: 13 Oct 2008, 03:10
by niklinds
Thanks, but is Bubba NFS or Samba???
Posted: 13 Oct 2008, 03:27
by Binkem
This should be \\Bubba\ or perhaps \\bubba.local\
you could also try entering Bubba's ip-adress.
doesn't your media player need a media server?
Posted: 13 Oct 2008, 04:07
by davidI
My (very) limited experience is that media players need to talk to a media server.
Bubba has 2:
- firefly for DAAP
- mediatomb for UPnP
These are switched on in the services section of the admin interface, and then can be accesses to manage then through (e.g.)
http://bubba:3689 for firefly
To access these from a media client you need to refer to them in the same way via the port numbers, e.g. bubba:3689
I don't see any mention in your question about any of this so this might be what you're missing...
Posted: 13 Oct 2008, 04:13
by niklinds
Hi
Now sorry, I have tried this, a can reach the bubba from every other computer but not from the Tvix 6500 (I can ping it). If you look inside Mediatomb server there are diffrent directories like, storage, home, video etc wich should i use.
I also tried the port number but i did not work either. In th Tvix you need to choice NFS or samba config, wich? and do you use / in only NFS or also in SAMBA.
Posted: 13 Oct 2008, 04:38
by Binkem
Bubba does only Samba as server
Posted: 13 Oct 2008, 04:41
by niklinds
Hi
What is your search way (example \\bubba) that you have put in the Tvix 6500 mediaplayer to make it work?
Posted: 13 Oct 2008, 12:09
by niklinds
What is the servername that i should add in the Tvix so that it can connect to my bubba 2, please help have tried everything... but it is not working
Posted: 14 Oct 2008, 03:55
by niklinds
Please help me, I need to know the SAMBA servername of the NAS (Bubba) so that i can stream to my mediaplayer (Tvix 6500). The mediaplayer needs servername and IP adress to work.
Posted: 14 Oct 2008, 07:56
by davidI
That is the name you set in the network/lan section of the admin interface.
Posted: 14 Oct 2008, 08:49
by niklinds
Hi DavidI
Standard name is there, thing it is Bubba, is this the name you refer to? are your 6500 working fine with Bubba and SAMBA?
Posted: 14 Oct 2008, 09:02
by davidI
Don't have a 6500. Was just answering your question about the Samba server name.