forum.excito.org

I had no acces to bubba anymore with admin.
Since there was no data on bubba I tried to reinstall the software.
I downloaded the 2 files bubba.img and bubba.img.md5. I put them on a USB stick. I shut down bubba with the power switch.
I put in the USB-stick into bubba pressed the power switch and put power on to bubba and released the switch after the led starts flashing.
Now 10 hours later the led is still flashing. Can someone advise me.

Zig

I have 2 ideas, what could be wrong:

1. the pendrive must have a FAT file system
2. you must put the bubba.img file in the root dir of the drive

If both requirements are met,
then I have one clue: it may be,
that bubba does not recognize your pendrive.

I changed the pendrive and now it works.

Thanks

nb000 wrote:
that bubba does not recognize your pendrive.