Re: Printer set up missing
Posted: 06 Feb 2012, 17:00
Just got the Update on the B3 but still not working.
Page 2 of 3
Re: Printer set up missing
Posted: 07 Feb 2012, 07:09
Yes, we have confirmed the issue with one printer model, and have scheduled a fix for the 2.5 release.
Re: Printer set up missing
Posted: 07 Feb 2012, 17:27
Oh... cool! So I am looking forward to this new update. Thank you 
Re: Printer set up missing
Posted: 14 Feb 2012, 03:19
I'm also having problems with my printer. It did work fine, then I reinstalled the b3 system and now the printer is not shown anymore.
Canon iP2000, b3 v2.4.
I posted a question about it here: http://forum.excito.net/viewtopic.php?f=9&t=3561 but never got a reply.
The printer is listed with a lsusb but does not show up in gui.
Canon iP2000, b3 v2.4.
I posted a question about it here: http://forum.excito.net/viewtopic.php?f=9&t=3561 but never got a reply.
The printer is listed with a lsusb but does not show up in gui.
Re: Printer set up missing
Posted: 17 Feb 2012, 08:31
Yes, we are on it!
Re: Printer set up missing
Posted: 03 Mar 2012, 10:39
You can add Brother HL-5130 to the list of printers that doesn't work. My lpr.log says the following:
Do you have any time estimate when you will have addressed this issue?
Code: Select all
Mar 3 16:30:56 duny udev-add-printer: PPD: foomatic-db-compressed-ppds:0/Brother-HL-5140-hl1250.ppd; Status: 1
Mar 3 16:33:48 duny udev-configure-printer: add /devices/platform/orion-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0
Mar 3 16:33:48 duny udev-configure-printer: parent devpath is /devices/platform/orion-ehci.0/usb1/1-1/1-1.2
Mar 3 16:33:48 duny udev-configure-printer: Device vendor/product is 04F9:0020
Mar 3 16:33:48 duny udev-configure-printer: failed to claim interface
Mar 3 16:33:48 duny udev-configure-printer: invalid or missing IEEE 1284 Device ID
Mar 3 16:33:48 duny udev-configure-printer: add /devices/platform/orion-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/usb/lp0
Mar 3 16:33:48 duny udev-configure-printer: parent devpath is /devices/platform/orion-ehci.0/usb1/1-1/1-1.2
Mar 3 16:33:48 duny udev-configure-printer: MFG:Brother MDL:HL-5130 series SERN:- serial:G4J474643
Mar 3 16:34:02 duny udev-configure-printer: URI matches without serial number: usb://Brother/HL-5130%20series
Mar 3 16:34:02 duny udev-configure-printer: No serial number URI matches so using those without
Mar 3 16:34:02 duny udev-configure-printer: About to add queue for usb://Brother/HL-5130%20series
Mar 3 16:34:05 duny udev-add-printer: add_queue: URIs=['usb://Brother/HL-5130%20series']
Mar 3 16:34:05 duny udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by
any .service files
Mar 3 16:34:05 duny udev-add-printer: Failed to get D-Bus object for PrinterDriversInstaller: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.PrinterDriver
sInstaller was not provided by any .service files
Mar 3 16:35:15 duny udev-add-printer: PPD: foomatic-db-compressed-ppds:0/Brother-HL-5140-hl1250.ppd; Status: 1
Re: Printer set up missing
Posted: 27 Mar 2012, 09:35
I have a Canon Selphy 510 that doesn't work with B3 (version 2.4).
Re: Printer set up missing
Posted: 01 Apr 2012, 13:00
Hi Excito
It's boring to use a B3 if my printer is missing in the network / intallation.
Can you provide a date when a usable update will be available?
Or shall I look for another NAS whish supports this function? Or can I help to solve this problem somehow?
Have a good evening...
It's boring to use a B3 if my printer is missing in the network / intallation.
Can you provide a date when a usable update will be available?
Or shall I look for another NAS whish supports this function? Or can I help to solve this problem somehow?
Have a good evening...
Re: Printer set up missing
Posted: 01 Apr 2012, 13:53
Hi,
My HP1020 is attached, on & visible in the B3 webinterface (version 2.4)
(Attached printers Hewlett-Packard HP LaserJet 1020)
But printing to this printer doesn't do anything. Nothing in the queue or printer.
It's just silently waiting for a command that doesn't arrive.
Looking in the samba log:
And that last line repeats 30 or so times
And the goes on with:
Found a possible solution on a website:
My HP1020 is attached, on & visible in the B3 webinterface (version 2.4)
(Attached printers Hewlett-Packard HP LaserJet 1020)
But printing to this printer doesn't do anything. Nothing in the queue or printer.
It's just silently waiting for a command that doesn't arrive.
Looking in the samba log:
Code: Select all
[2012/04/01 19:39:33.410418, 1] smbd/service.c:1070(make_connection_snum)
adriaan (192.168.2.101) connect to service HP-LaserJet-1020 initially as user bas (uid=1001, gid=100) (pid 23636)
[2012/04/01 19:39:48.218852, 1] smbd/service.c:1251(close_cnum)
adriaan (192.168.2.101) closed connection to service home
[2012/04/01 19:39:48.221340, 1] smbd/service.c:1251(close_cnum)
adriaan (192.168.2.101) closed connection to service storage
[2012/04/01 19:39:48.223628, 1] smbd/service.c:1251(close_cnum)
adriaan (192.168.2.101) closed connection to service HP-LaserJet-1020
[2012/04/01 19:41:53.129403, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service HP-LaserJet-1020 initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:41:53.158398, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service storage initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:41:53.183555, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service home initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:42:08.407780, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service storage
[2012/04/01 19:42:08.409677, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service home
[2012/04/01 19:42:14.400807, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service HP-LaserJet-1020
[2012/04/01 19:43:12.730565, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service storage initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:43:12.736282, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service HP-LaserJet-1020 initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:43:12.745298, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service home initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 19:43:26.404089, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service HP-LaserJet-1020
[2012/04/01 19:43:26.407523, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service home
[2012/04/01 19:43:26.409706, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service storage
[2012/04/01 19:50:35.832690, 0] param/loadparm.c:8672(process_usershare_file)
process_usershare_file: share name hp-laserjet-1020,localsplonly contains invalid characters (any of %<>*?|/\+=;:",)And the goes on with:
Code: Select all
[2012/04/01 19:52:14.769713, 0] param/loadparm.c:8672(process_usershare_file)
process_usershare_file: share name hp-laserjet-1020,localsplonly contains invalid characters (any of %<>*?|/\+=;:",)
[2012/04/01 19:52:14.822665, 1] smbd/ipc.c:447(api_fd_reply)
api_fd_reply: INVALID PIPE HANDLE: 1376
[2012/04/01 19:52:14.825785, 1] smbd/ipc.c:447(api_fd_reply)
api_fd_reply: INVALID PIPE HANDLE: 1377
[2012/04/01 20:02:52.085311, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service home initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 20:02:52.097265, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service HP-LaserJet-1020 initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 20:02:52.113398, 1] smbd/service.c:1070(make_connection_snum)
lt101308 (192.168.2.100) connect to service storage initially as user bas (uid=1001, gid=100) (pid 24508)
[2012/04/01 20:03:02.386191, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service storage
[2012/04/01 20:03:02.388153, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service home
[2012/04/01 20:03:02.390201, 1] smbd/service.c:1251(close_cnum)
lt101308 (192.168.2.100) closed connection to service HP-LaserJet-1020Is it time for a a real printer or does anyone know a good workaround?The LaserJet 1020 is a host-based printer (i.e. it does not have much built-in intelligence), and, as such, does not understand standard printer languages such as PCL5; it relies on the host providing the raster image.
Re: Printer set up missing
Posted: 02 Apr 2012, 03:49
No need for a real printer.
The hplj1010 doesn't understand the common printer language either and was build for Microsoft OS. But if you attach it to the b3 it should work. You are addressing the printer through another computer and not directly.
P
The hplj1010 doesn't understand the common printer language either and was build for Microsoft OS. But if you attach it to the b3 it should work. You are addressing the printer through another computer and not directly.
P
Re: Printer set up missing
Posted: 10 Apr 2012, 16:42
Hi, my printer is not showing up either. Its a Canon Pixma IP4200. just upgraded my B" to v2.4, and now the B2 are not working as a printer server anymore. To bad!
Is there an upgrade of the software coming, or am I missing some hidden function?
PM
Is there an upgrade of the software coming, or am I missing some hidden function?
PM
Re: Printer set up missing
Posted: 23 Apr 2012, 14:10
Hi, Also got a new B3 and love it, but I'm also somewhat new to Linux. I have a slightly different problem. With original software version in unit my printer could be attached and drivers installed but would not print. With v2.4 upgrade, printer attached automatically, installed, and works perfectly! So I should be happy, and am, but small issue, not really a problem, remains. Without the Printer service page, how do I easily get rid of original, non-working, printer installation? Or, is it time to brush up on Linux? Thanks.
JRV
JRV
Re: Printer set up missing
Posted: 24 Apr 2012, 11:15
Thanks johannes, I found your hint to find CUPS at b3:631 in another printer topic and was able to delete my non-working printer. I'm happy now.
JRV
JRV
Re: Printer set up missing
Posted: 10 May 2012, 03:16
Still no printer working with an upgrade to b3 2.4.2. (did work pre 2.4, Canon iP2000)
Please, this is a real issue for a server where printing is one of it's main purposes.
Please, this is a real issue for a server where printing is one of it's main purposes.
Re: Printer set up missing
Posted: 10 May 2012, 03:22
I know, we are working on a resolution. Will update you guys soon.