New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Lenny image and how to proceed
Re: Lenny image and how to proceed
Tor: thanks for uploading the new mediatomb package. Is this a package that can be obtained via apt-get update? If not, please state how to install this software.
Re: Lenny image and how to proceed
Ubi,
An
hopefully should do the trick. If not do a
/Tor
An
Code: Select all
apt-get update
apt-get upgrade
hopefully should do the trick. If not do a
Code: Select all
apt-get install mediatomb-common mediatomb-daemon
Co-founder OpenProducts and Ex Excito Developer
Re: Lenny image and how to proceed
Hi,
I've uploaded new versions of the bubba-package and mt-daapd. These should hopefully fix the issues with mt-daapd and avahi announcements disappearing. Further more transcoding is disabled in mt-daapd and it should now announce itself as Firefly on "hostname" instead of Bubba|TWO.
Please let me know of any regressions.
/Tor
I've uploaded new versions of the bubba-package and mt-daapd. These should hopefully fix the issues with mt-daapd and avahi announcements disappearing. Further more transcoding is disabled in mt-daapd and it should now announce itself as Firefly on "hostname" instead of Bubba|TWO.
Please let me know of any regressions.
/Tor
Co-founder OpenProducts and Ex Excito Developer
Re: Lenny image and how to proceed
I don't own a media streamer so I can't do a full test, but the upgraded version of MediaTomb did not have permission problems and the Firefly web-interface announces itslef as firefly
Ubi
Ubi
-
- Posts: 904
- Joined: 09 Oct 2009, 18:49
Re: Lenny image and how to proceed
Do you mean if you just type "shutdown now"? Try adding -h to halt the system too. This isn't a bug, using shutdown without any other flags puts the box into single user mode (runlevel 1).
[EDIT]somehow posted this on the wrong thread I think. :S
[EDIT 2]No I didn't. Was directed at Ubi on 5th October.
[EDIT]somehow posted this on the wrong thread I think. :S
[EDIT 2]No I didn't. Was directed at Ubi on 5th October.
Last edited by RandomUsername on 11 Oct 2010, 17:18, edited 2 times in total.
Re: Lenny image and how to proceed
Hi,
Uploaded new version of the bubba package, version 1.0.5. This should hopefully fix the problems with setting network config from web admin. I have tested this briefly and it seems to work, but test with some precaution.
/Tor
Uploaded new version of the bubba package, version 1.0.5. This should hopefully fix the problems with setting network config from web admin. I have tested this briefly and it seems to work, but test with some precaution.
/Tor
Co-founder OpenProducts and Ex Excito Developer
Re: Lenny image and how to proceed
I was aware of the -h option. It does not help
Ubi
Ubi
Re: Lenny image and how to proceed
Hi everyone,
A silly question. Now that I have some time, I am about to scrub a hard-drive and reinstall the Lenny Image from scratch on my test b1.
I assume that I still get the bubba.img file from http://update.excito.net/install/latest ... ver-lenny/ (19-May-2009 13:07 180M).
If so, what should be in the /etc/apt/sources.list file to get the latest distributions?
--Tim
A silly question. Now that I have some time, I am about to scrub a hard-drive and reinstall the Lenny Image from scratch on my test b1.
I assume that I still get the bubba.img file from http://update.excito.net/install/latest ... ver-lenny/ (19-May-2009 13:07 180M).
If so, what should be in the /etc/apt/sources.list file to get the latest distributions?
--Tim
Re: Lenny image and how to proceed
[root@bubba:/etc]$ apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
bubba
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 740kB of archives.
After this operation, 4096B of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://b1.update.excito.org stable/main bubba 1.0.5 [740kB]
Fetched 740kB in 1s (402kB/s)
(Reading database ... 17771 files and directories currently installed.)
Preparing to replace bubba 1.0.4 (using .../archives/bubba_1.0.5_all.deb) ...
Enable allmulti on eth0
Unpacking replacement bubba ...
Setting up bubba (1.0.5) ...
Restarting web server: apache2 ... waiting .
update-rc.d: warning: /etc/init.d/bubba-cfg missing LSB information
update-rc.d: see <http://wiki.debian.org/LSBInitScripts>
Enable allmulti on eth0
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
bubba
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 740kB of archives.
After this operation, 4096B of additional disk space will be used.
Do you want to continue [Y/n]?
Get:1 http://b1.update.excito.org stable/main bubba 1.0.5 [740kB]
Fetched 740kB in 1s (402kB/s)
(Reading database ... 17771 files and directories currently installed.)
Preparing to replace bubba 1.0.4 (using .../archives/bubba_1.0.5_all.deb) ...
Enable allmulti on eth0
Unpacking replacement bubba ...
Setting up bubba (1.0.5) ...
Restarting web server: apache2 ... waiting .
update-rc.d: warning: /etc/init.d/bubba-cfg missing LSB information
update-rc.d: see <http://wiki.debian.org/LSBInitScripts>
Enable allmulti on eth0
Re: Lenny image and how to proceed
Hi,
I just uploaded version 1.0.6 of the Bubba package. This should hopefully resolve the issue with fetchmail not starting as it should. You might have to remove and add any fetcmail jobs in the UI for this fix to take effect.
Regarding shutdown. If you issue a shutdown -h now it really should shut down the system and the led should stop blinking. The problem is that under some circumstances there might be a failure to spin down the disk.
When shutting down the unit via web ui it should however shut down properly.
Tim, regarding sources. The one provided in the image should be fine. We only have one repository for b1-lenny.
ctoo, regarding the avahi check for a .local domain I will have to check that some more. Am I correct in that the check always fail due to the wrong version of host? It would seem like a quick fix would be to just change AVAHI_DAEMON_DETECT_LOCAL to 0 in /etc/default/avahi-daemon and remove any stale /var/run/avahi-daemon files. Could anyone confirm or dismiss this?
Does anyone have any further regressions between the Sarge and Lenny spin for B1?
/Tor
I just uploaded version 1.0.6 of the Bubba package. This should hopefully resolve the issue with fetchmail not starting as it should. You might have to remove and add any fetcmail jobs in the UI for this fix to take effect.
Regarding shutdown. If you issue a shutdown -h now it really should shut down the system and the led should stop blinking. The problem is that under some circumstances there might be a failure to spin down the disk.
When shutting down the unit via web ui it should however shut down properly.
Tim, regarding sources. The one provided in the image should be fine. We only have one repository for b1-lenny.
ctoo, regarding the avahi check for a .local domain I will have to check that some more. Am I correct in that the check always fail due to the wrong version of host? It would seem like a quick fix would be to just change AVAHI_DAEMON_DETECT_LOCAL to 0 in /etc/default/avahi-daemon and remove any stale /var/run/avahi-daemon files. Could anyone confirm or dismiss this?
Does anyone have any further regressions between the Sarge and Lenny spin for B1?
/Tor
Co-founder OpenProducts and Ex Excito Developer
Re: Lenny image and how to proceed
i tried the new version and it installs without issues. Have not tried all services yet.
What magic command comes out of the web-based shutdown that it does spin down my HD, but giving the shutdown -h command does not?
Ubi
What magic command comes out of the web-based shutdown that it does spin down my HD, but giving the shutdown -h command does not?
Ubi
Re: Lenny image and how to proceed
Hi tor,
Concerning the AVAHI_DAEMON_DETECT_LOCAL setting in /etc/default/avahi-daemon, see the following post:
http://forum.excito.net/viewtopic.php?f ... t=15#p9617
So, yes, setting AVAHI_DAEMON_DETECT_LOCAL to 0 will probably fix it in most case (note the warning related to this written in /etc/default/avahi-daemon).
Concerning the AVAHI_DAEMON_DETECT_LOCAL setting in /etc/default/avahi-daemon, see the following post:
http://forum.excito.net/viewtopic.php?f ... t=15#p9617
So, yes, setting AVAHI_DAEMON_DETECT_LOCAL to 0 will probably fix it in most case (note the warning related to this written in /etc/default/avahi-daemon).
Re: Lenny image and how to proceed
Hi,
unfortunately I couldn´t test the lenny image, because there was and is family business. I might be able to mess around with it in the next weeks....
Just wanted to ask what the current status is? I think the lenny image http://update.excito.net/install/latest ... ver-lenny/ is not yet official, but doesn´t contain any bugs?
Best Regards
Boy
unfortunately I couldn´t test the lenny image, because there was and is family business. I might be able to mess around with it in the next weeks....
Just wanted to ask what the current status is? I think the lenny image http://update.excito.net/install/latest ... ver-lenny/ is not yet official, but doesn´t contain any bugs?
Best Regards
Boy