forum.excito.org

I bought a bubba2 with a 500G drive and a storage with 500G also. They have been sitting around unused until the raid feature came out. I am thinking that it may be the external SATA connector/cable that may not be seating well because of the depth of the connector with the size of the opening.

Sometimes when booting now I get the blue led blinking twice then pausing and it never stops. What does this mean ? I could not find this in the manual

I bought a 4 line display from CrystalFontz part#634 and wrote a deamon that display the current time on line 1, the current date on line 2, and the current outside temperature on line 3. The temperature is retreaved via ftp call to the local weather metar site via the curl library. This display is ...

My version reads 1.0.13 but updating does nothing. my /etc/apt/sources.list
file is as follows:

# BUBBA|TWO apt sources.list
#
# Changes in this file might break your system
#
# vim: ft=debsources

# The stable BUBBA|TWO repository, is in the suite "stable".
deb http://update.excito.org ...

With this new product release is an update that offers raid configuration getting nearer ?

Are there any estimates when excito will support raid1 on Bubba 2 ?
Raid and a permanent fix for the Ethernet bug are the 2 biggest
items I am looking forward to.

It turns out this was caused by the silicon bug. Executing the line:
ethtool --offload eth0 tx off rx off
as root fixed the problem.

Horde may only be showing you what fetchmail is doing. First separate the problem.

With a capture via tshark I found the checksum in the TCP packet never changing from A53F even though the timestamp changes. Wire Shark identifies the checksum in error. The ACK on the connection had a good
checksum, it was only the data packets and the retransmission of that data that showed up the ...

My fetchmail fails to collect email from my pop server. Watching it with tshark gave me no solution either. I tried replicating the problem with telnet by
using a command of telnet server.com 110
I get a connect. But when I send the CAPA command I don't get any response at all and the CAPA packet is ...

My Email server which require a username and password to send email would not work with Bubba 2 until I added the following to end of the file
/etc/postfix/main.cf

smtp_sasl_security_options = noanonymous

I still have not gotten the pop server to work with fetchmail. The server
requires username ...

I see messages like this in the log file.

lost connection with smtp.mailserver.net[xx.xx.xx.xx] while performing the EHLO handshake

In looking at the log files I found that Dovecot had exited when the time was updated. Rebooting fixed PIM to allow me to log in. So be careful on setting time. My time adj had a default date of 2029. I thought there might be an ntp thread to get time but apparently not.

I created a user account and I can log in to the admin page with that user
name and password. However trying to log in to PIM I get an Login Failed message from Horde. Also the documentation implies there is a /home/user/Mail directory created for Email but I don't find it.
I don't want to fetch ...

I have enjoyed my bubba but the lack of Raid limited how I used it. I am looking forward to upgrading to a Bubba 2. Thanks for the good work !