hi nobody,
good news, now the raid is working.
i found following information:
http://wiki.excito.org/wiki/index.php/Updating_your_B3_to_support_3TB_disks
After installing this bootloader-fix, i installed my b3 once more from scratch (firmware 2.4.1.1)
Now the raid was build successfully. After ...
Please note the new address for this forum : forum.excito.org. The old address redirects here but I don't know for how long. Thanks !
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Search found 5 matches
- 17 Dec 2012, 10:34
- Forum: B2 & B3 Support
- Topic: Raid problem (B3 and S1)
- Replies: 8
- Views: 10842
- 16 Dec 2012, 05:55
- Forum: B2 & B3 Support
- Topic: Raid problem (B3 and S1)
- Replies: 8
- Views: 10842
Re: Raid problem (B3 and S1)
i did run the 3rd line
there was no output at all, nothing changed
Code: Select all
mount -a- 14 Dec 2012, 04:55
- Forum: B2 & B3 Support
- Topic: Raid problem (B3 and S1)
- Replies: 8
- Views: 10842
Re: Raid problem (B3 and S1)
here's the output after attemting to build the raid:
root@b3:/# mount
/dev/sda1 on / type ext3 (rw,noatime)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode ...
root@b3:/# mount
/dev/sda1 on / type ext3 (rw,noatime)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode ...
- 10 Dec 2012, 05:22
- Forum: B2 & B3 Support
- Topic: Raid problem (B3 and S1)
- Replies: 8
- Views: 10842
Re: Raid problem (B3 and S1)
The operating system is still running, i can access the system. The web-interface shows error-messages. Some directories on the internal disk have been deleted and the raid-setup is stopped during installing...
- 09 Dec 2012, 13:09
- Forum: B2 & B3 Support
- Topic: Raid problem (B3 and S1)
- Replies: 8
- Views: 10842
Raid problem (B3 and S1)
Hi,
i try to install a raid-system with my B3 (2TB) together with an eSata S1 (2TB).
I installed my B3 from scratch and updated the firmware to the version 2.5.1.2.
After connecting the S1 via eSata i tried to build the raid.
After approx 60% of the setup this message appears:
Caught error ...
i try to install a raid-system with my B3 (2TB) together with an eSata S1 (2TB).
I installed my B3 from scratch and updated the firmware to the version 2.5.1.2.
After connecting the S1 via eSata i tried to build the raid.
After approx 60% of the setup this message appears:
Caught error ...