forum.excito.org

Thanks for both of your quick respons.

@Johannes:
With copying a file to the bubba top gives the results:

[size=7]top - 23:05:06 up 2 days, 1:51, 1 user, load average: 0.81, 0.22, 0.13
Tasks: 90 total, 3 running, 87 sleeping, 0 stopped, 0 zombie
Cpu(s): 72.0%us, 19.4%sy, 0.0%ni, 0.0%id, 0.0%wa, 0 ...

In my Bubba2 I have a 1 TB WD GreenPower type 1000FYP RE2-GP
http://www.westerndigital.com/en/products/products.asp?driveid=385

The results of my Bubba2 are:

cp128139-b:/home/storage# dd if=/dev/zero of=bigfile count=5k bs=100k
5120+0 records in
5120+0 records out
524288000 bytes (524 MB ...

I am glad to know that I am not the only one who is facing this problem.
Hopefully somebody from Excito can reproduce the problem in order to fix this.

@Johannes: Are you able to reproduce this? Else I can ask the local distributor to sent you my old Bubba2 which have been changed for a new one ...

Thx Peter,

I tried to do that but unfortunately this didn't solve the issue neither.


cp128139-b:/home/paul# apt-get dist-upgrade (as root)
Reading package lists... Done
Building dependency tree... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded ...

I found something which might have something to do with it.

When I execute the command (as root):
apt-get update

I get the following errors in my terminal:


Get:1 http://ftp.se.debian.org etch Release.gpg [386B]
Get:2 http://update.excito.org marielle Release.gpg [189B]
Get:3 http://update ...

I have connected a laptop directly to the bubba2 to see what kind of speed I got.
The network card in my laptop is 100 mb/s.

The speed using the command:
scp <file> <username>@<ip bubba2>:<path + directory>/.
shows again a speed of 2,5 MB/s.

Even for a 100 Mb/s much too slow. :(

At the local distributor we've used different cables as I did at home.
Yesterday I took also a brand new cat6 patch cable and I have connected one PC with a Gb LAN directly to the Bubba2.
This is still 2,5 MB.

I have also disabled the auto-Negotiation because I know that everything is Gb which is ...

Is the root cause of this problem the same as described in http://forum.excito.net/viewtopic.php?t=1436 ?

In the meantime I went back to the local distributor.
He reproduced the problem. With the old bubba he got 4 MB/s and with a new one 27 MB/s.
Coming back home I installed the brandnew bubba (which he had tested) in my network.
Guess what............

Still 2,5 MB/s :shock:

I took a PC with a ...

Yes, the update and the fixes are installed but the current speed is still 2,4 MB/s

My gigabit connection (LAN) does not work as it should be.
Hope someone can help me.

On the LAN connector on the Bubba there is just one led blinking i.s.o. two leds.
The average speed of the gigabit connection is approx 2,5 MB p/s. This is measured with scp.

If I transfer data from PC1 (with ...

Hi Johannes,

From my point of view the message from ahab describes a different problem. My bubba is not going down. It simply does not react anymore after transferring a bigger file.
So my issue is the same as explained in the first message from MartinHageras.
So you are right that we have two ...

I have the same problem too. The initialization stage remains and nothing happens anymore. It was just a images from approx 4 GB of size......
The software version I use is Version 1.0.8-1

When I use FTP then everything works fine. But using the browser (In this case firefox) the problem as ...

For me the command "/sbin/ifconfig eth0 mtu 1500" solved the problem too.


Thanks

@Carl: Thanks for your quick respons.
Unfortunately I am facing exactly the same issue as described by DavidI.

What can we do to get the MTU value changed in the Bubba2?